300ZX V6-2960cc SOHC Turbo (VG30ET) (1984)
TABLE 2
MODEL
PART DESCRIPTION
PART NUMBER
Pulsar NX
Headlight Switch Assembly
25540-17M20
300ZX
Headlight Switch Assembly
25540-01P09
Service Procedure
^
Make sure the serial number of the vehicle falls within affected VIN range of Table 1.
^
Use Service Procedure A on page 3/10 for removal and installation of the headlight switch in the Pulsar NX, and Service Procedure B on page
4/10 for the 300ZX.
Service Procedure A - Pulsar NX
NOTE:
The headlight switch can be replaced without removing the steering wheel.
1.
Remove the steering column covers (upper and lower shells) as shown in Figure 2.
2.
Disconnect both wire harness connectors as shown in Figure 3.