300ZX V6-2960cc SOHC Turbo (VG30ET) (1984)
4. Turn wheel hub several times in both directions to seat wheel bearing correctly.
5. Again tighten wheel bearing nut.
6. Turn back wheel bearing lock nut within 60°.
7. Install adjusting cap and new cotter pin.
8. Measure wheel bearing preload and axial play.Axial play: 0 mm (0 in)When bearing preload(As measured at wheel hub bolt):With new
parts6.66-14.61 N (0.70-1.49 kg, 1.54-3.29 lb) With used parts 1.67-7.75 N (0.17-0.79 kg, 0.37-1.74 lb) Repeat above procedures until correct
starting torque is obtained.
9. Spread cotter pin.
10.
Install hub cap with new 0-ring.