300ZX V6-2960cc SOHC Turbo (VG30ET) (1984)
Pack hub and hub cap with recommended multi-purpose grease up to shaded portions.
Coat each bearing cone with recommended multi-purpose grease.After wheel bearing has been replaced or front axle has been reassembled, adjust
wheel bearing preload.
1. Throughty clean all parts to prevent dirt entry before adjustment.
2. Apply recommended multi-purpose grease sparingly to the following parts.
Threaded portion of spindle.
Contact surface between lock washer and outer wheel bearing.
Hub cap and 0-ring.
Grease seal lip.
3. Tighten wheel b~aring lock nut.