nissan Workshop Repair Guides

Nissan and Datsun Workshop Service and Repair Manuals

ABOUT US
Harmonic Balancer - Crankshaft Pulley > < Tools - SRS, A/T, Antitheft, O2, Engine|Page 1309

300ZX Coupe V6-2960cc DOHC (VG30DE) (1994)

Page 1
background image

Crankshaft: Specifications

Crankshaft:

Standard Journal Diameter:

Main Bearing ...................................................................................................................................................................................................  [09]
Crank Pin .........................................................................................................................................................................................................  [10]

Out Of Round [01] ............................................................................................................................................................................................  0.0002
Taper [01] .........................................................................................................................................................................................................  0.0002

Bearing Clearance:

Main Bearings .......................................................................................................................................................................................  0.0011-0.0022
Connecting Rod Bearings .....................................................................................................................................................................  0.0011-0.0019

Connecting Rods:

Piston Pin Bore Diameter .....................................................................................................................................................................  0.8661-0.8666
Side Clearance ......................................................................................................................................................................................  0.0079-0.0138

[01] --  Maximum.
[09] --  Grade 0, 2.4790-2.4793 inch; grade 1, 2.4787-2.4790 inch; grade 2, 2.4784-2.4787 inch.
[10] --  Grade 0, 1.9672-1.9675 inch; grade 1, 1.9670-1.9672 inch; grade 2, 1.9667-1.9670 inch.

NOTE: All Measurements are given in inches unless otherwise specified.

Harmonic Balancer - Crankshaft Pulley > < Tools - SRS, A/T, Antitheft, O2, Engine|Page 1309