300ZX Coupe V6-2960cc DOHC (VG30DE) (1994)
9. Install a suitable stopper bolt into tensioner arm of auto-tensioner so that auto-tensioner pusher does not spread out.
10. Set No.1 cylinder at T.D.C. on its compression stroke.
11. Remove auto-tensioner and timing belt.
Caution:
a. Do not bend timing belt
b. After removing timing belt, do not turn crankshaft and camshaft separately because valves will strike piston heads.
c. Make sure that timing belt, camshaft sprocketm crankshaft sprocket, idler pully and auto-tensioner are clean and free of oil and
water.
Inspection