300ZX Coupe V6-2960cc DOHC (VG30DE) (1994)
Ignition Timing Connector: Locations
Method A (Without SST)
Removing #1 Ignition Coil
1. Remove No. 1 ignition coil.
Timing Connection
2. Connect No. 1 ignition coil and No. 1 spark plug with suit able high-tension wire as shown, and attach timing light clamp to this wire.
3. Check ignition timing.
High-tension Wire Preparation
4. For above procedures, enlarge suitable high-tension wire end with insulating tape as shown.