300ZX Coupe V6-2960cc DOHC (VG30DE) (1994)
Oxygen Sensor: Service and Repair
Heated Oxygen Sensor Location
REMOVAL
1. Disconnect harness terminal.
2. Remove sensor with suitable socket or wrench.
Oxygen Sensor
INSTALLATION
1. Apply a thin coating of anti-seize compound to the threads.
NOTE: Do not contaminate sensing tip with compound.
2. Install sensor and torque it to 45 N-m (4.5 kg-m, 33 lb.ft.).
3. Apply a thin coating of dielectric compound to the connector.
4. Connect harness terminal.