nissan Workshop Repair Guides

Nissan and Datsun Workshop Service and Repair Manuals

ABOUT US
Power Transistor <--> [Ignition Control Module] > < Diagram Information and Instructions|Page 3842

300ZX Coupe V6-2960cc DOHC (VG30DE) (1994)

Page 1
background image

Ignition Coil: Service and Repair

Removing Balance Tube

REMOVAL
1. Remove the intake manifold balance tube when changing coils # 5 and # 6 only.

NOTE: The o-rings can be re-used if not damaged upon removal.

Removing Ignition Coils

2. Disconnect the ignition coil connector.
3. Remove the ignition coil fasteners and remove the coil.

INSTALLATION

1. Apply a small amount of di-electric compound to the inside of the ignition coil boots.
2. Reinstall the ignition coil and tighten the fasteners.
3. Reinstall the balance tube and tighten the fasteners.

Power Transistor <--> [Ignition Control Module] > < Diagram Information and Instructions|Page 3842