nissan Workshop Repair Guides

Nissan and Datsun Workshop Service and Repair Manuals

Fuel Pump Relay|Specifications|Page 224 > < Fuel Pump Relay|Specifications|Page 222
Page 1
background image

Fuel Pump Relay: Service Precautions

*** Green or Blue Relay Cautions TSB#NTB95-070   July 5, 1995 

Relay Testing

When diagnosing at any green or blue colored relay (type 1M, 1 make-normally open relay), observe the following cautions to prevent damage to the 
Engine Control Module 

(ECM):

1. Note that the schematic on the fuel pump relay is rotated 90 degrees from the orientation of the relay terminals in the relay connector (see

diagram):

2. Exercise caution to ensure that the correct terminals are being probed at the relay connector during diagnosing/checking.

NOTE: Use a circuit tester first to verify the terminals that are supplied with battery voltage. If battery voltage is connected to terminal 2, the
ECM will be damaged if the circuit being tested has terminal 2 connected to the ECM.

Fuel Pump Relay|Specifications|Page 224 > < Fuel Pump Relay|Specifications|Page 222