nissan Workshop Repair Guides

Nissan and Datsun Workshop Manuals

< PREV PAGE NEXT PAGE >
Page 1
background image

Ignition Switch: Service and Repair

Fig. 2 Ignition Switch Replacement

1. Disconnect battery ground cable.
2. Remove four upper and lower shell cover retaining screws, then the shell covers.
3. Disconnect electrical connectors from switch.
4. Remove switch retaining screw from steering lock, Fig. 2.
5. Reverse procedure to install.

Starting and Charging > Sensors and Switches - Starting and Charging > Ignition Switch > Component Information > Description and Operation > Page 4778

< PREV PAGE NEXT PAGE >