300ZX Coupe V6-2960cc DOHC (VG30DE) (1994)
Inspection Standard
^
Inspection of high clutch return springs
^
Inspection of high clutch drive plate
-
Thickness of drive plate:
Standard: 1.6 mm (0.063 in)
Wear limit: 1.4 mm (0.055 in)
^
Measurement of clearance between retaining plate and snap ring
-
Specified clearance:
Standard: 1.8-2.2 mm (0.071-0.087 in)
Allowable limit: 3.2 mm (0.126 in)
-
Retaining plate:
Refer to specifications See: Specifications/Mechanical Specifications