300ZX Coupe V6-2960cc DOHC (VG30DE) (1994)
2. Remove drive plates, driven plates, retaining plate, dish plate and snap ring.
3. Remove snap ring from clutch drum while compressing clutch springs.
^
Do not expand snap ring excessively.
4. Remove spring retainer and return spring.
5. Install seal ring onto oil pump cover and install reverse clutch drum. While holding piston, gradually apply compressed air to oil hole until piston
is removed.
^
Do not apply compressed air abruptly.
6. Remove D-ring and oil seal from piston.
INSPECTION
Reverse clutch snap ring and spring retainer
^
Check for deformation, fatigue or damage.
Reverse clutch return springs