Testing and Inspection of Condenser Fan Motor Relay for 1982 310 L4-1488cc 15L SOHC
Condenser Fan Motor Relay: Testing and Inspection
Fig. 69 Cooler relay testing
1.
Remove RH dash trim, disconnect wiring harness connector to relay, and remove relay from evaporator caseFig. 69.
2.
Check continuity with ohmmeter. Continuity should only exist between terminals 10 and 11.
3.
Using jumper wires, connect battery voltage across terminals 10 and 11.
4.
Ohmmeter should indicate continuity between terminals 1 and 3 and between terminals 6 and 9.