350Z V6-3.5L (VQ35) (2003)
Checking Equipment
When ordering the equipment, contact your NISSAN/INFINITI distributor.
NOTE:
-
The CONSULT-II must be used in conjunction with a program card. CONSULT-II does not require loading (Initialization) procedure.
-
Be sure the CONSULT-II is turned off before installing or removing a program card.
CAUTION:
-
If CONSULT-II is used with no connection of CONSULT-II CONVERTER, malfunctions might be detected in self-diagnosis depending on
control unit which carries out CAN communication.
-
If CONVERTER is not connected with CONSULT-II, vehicle occur the "FAIL-SAFE MODE" which is
-
"LIGHT UP the HEADLIGHT" and/or "Cooling FAN ROTATING" when CONSULT-II is started.
CONSULT-II Start Procedure
1. Turn off the ignition switch.
2. Connect CONSULT-II and CONSULT-II CONVERTER to the data link connector.
3. Turn on the ignition switch.