350Z V6-3.5L (VQ35) (2003)
^
PRESS DOWN on the tabs shown in Figure 14
19.
Remove the Amplifier from the vehicle.
Re-Assembly
20.
Install the new Audio Amplifier, making sure the wire harnesses are:
^
Securely reconnected (connector snapped in place) to the Amplifier unit.
^
Properly routed to prevent pinching, rubbing, or chaffing.
21.
Re-install all components in the reverse order you removed them.
22.
Re-connect the negative battery cable.
23.
Re-program all radio station presets.
24.
Re-set the clock.
Check Audio Operation
25.
Confirm the audio system operates properly.
Render Old Amplifier Useless (make it un-useable)
CAUTION:
Use suitable hand and eye protection when performing the next step.
26.
To prevent the old Amplifier from being re-used, use a hammer to break the connectors on the Amplifier (see Figure 15).