nissan Workshop Repair Guides

Nissan and Datsun Workshop Service and Repair Manuals

Radio/Stereo > < Campaign - BOSE(R) Amplifier Replacement|Page 12529
Page 1
background image

CD Changer: Service and Repair

Locking CD auto-changer mechanism (Audio unit of BOSE system)    

CAUTION:

-

Prior to removing a malfunctioning CD auto-changer unit (Audio unit of BOSE system) that will be shipped for repair, the changer mechanism
MUST BE LOCKED to prevent the mechanism from being damaged during shipping.

-

If a CD is jammed or unable to be removed from the unit, do NOT lock the changer mechanism. If the unit is to be shipped for repair, carefully
package the unit to prevent vibration and shock.

DAMPER LOCK PROCEDURE

1. Eject and remove any CDs from the Audio unit (BOSE system).
2. Turn ignition switch OFF. Wait until Audio unit (BOSE system) display is off and mechanism stops moving (mechanism sound stops).
3. Press any one of the disc selection buttons once. When a display shows on the Audio unit (BOSE system), press the same disc selection button

again within 5 seconds.
-

The changer mechanism will lock itself within 10 seconds.

4. After mechanism stops moving (mechanism sound stops), open the driver and passenger window, and then disconnect negative battery cable.

CAUTION:  After the battery cables are disconnected, do not open/close the driver and/or front passenger door with the window in the full up
position. The automatic window adjusting function will not work and the side roof panel may be damaged.

NOTE:  After installing a new or remanufactured Audio unit (BOSE system), switching the Audio unit (BOSE system) ON will automatically
unlock the mechanism. A special unlocking procedure is not required.

Radio/Stereo > < Campaign - BOSE(R) Amplifier Replacement|Page 12529