350Z V6-3.5L (VQ35) (2003)
Drive Belt: Service and Repair
REMOVAL
1. Remove alternator and power steering pump belt.
2. Remove air conditioner compressor belt.
CAUTION: Grease is applied to idler pulley adjusting bolt. Be careful to keep grease away from the belt.
INSTALLATION
1. Install belts to pulley in reverse order of removal.
CAUTION: Make sure belt is correctly engaged with the pulley groove.
Check for oil and coolant on belt and each pulley groove.
2. Adjust belt tension.
3. Tighten each adjusting bolt and nut to the specified torque.
4. Make sure that tension of each belt is within the standard.