350Z V6-3.5L (VQ35) (2003)
3. Install the front oil seal on the front timing chain case. Apply new engine oil to the oil seal edges.
-
Install it so that each seal lip is oriented as shown in figure.
-
Using a suitable drift, press-fit oil seal until it becomes flush with timing chain case end face.
-
Make sure the garter spring is in position and seal lip is not inverted.
4. Install the water pump cover and the chain tensioner cover to front cover.
-
Apply RTV Silicone Sealant or equivalent.
5. Install front timing chain case as follows:
a. Apply liquid gasket to front timing chain case back side as shown.
Apply RTV Silicone Sealant or equivalent.