350Z V6-3.5L (VQ35) (2003)
a. Apply liquid gasket to front timing chain case back side as shown.
Apply RTV Silicone Sealant or equivalent.
b. Install oil pan gasket.
Apply RTV Silicone Sealant or equivalent.
Align notch of front timing chain case with protrusion of oil pan gasket.
Apply liquid gasket to top surface of oil pan (upper) as shown in figure.
Use Genuine RTV Silicone Sealant or equivalent.
c. Assemble front timing chain case.
i.
Fit lower end of front timing chain case tightly onto top face of oil pan (upper). From the fitting point, make entire front timing chain case
contact rear timing chain case completely.
CAUTION: Be careful that oil pan gasket is in place.