350Z V6-3.5L (VQ35) (2003)
Refrigerant Pressure Sensor / Switch: Service and Repair
Refrigerant Pressure Sensor
REMOVAL
1. Remove the liquid tank. Refer to "Liquid Tank".
2. Using a vise secure liquid tank and remove refrigerant pressure sensor.
CAUTION:
-
When working, be careful not to damage the condenser fins.
INSTALLATION
Installation is basically the reverse order of removal.
CAUTION:
-
Apply compressor oil to the O-ring of the refrigerant pressure sensor when installing it. Refrigerant pressure sensor
Tightening torque : 9.9 - 11.7 N.m (1.0 - 1.2 kg-m, 87 - 104 in-lb)