350Z V6-3.5L (VQ35) (2003)
3. Check harness continuity between stop lamp switch terminals 1 and 2 under the given conditions.
If NG, adjust stop lamp switch installation, refer to "BRAKE PEDAL" , and perform step 3 again.
STOP LAMP SWITCH (FOR M/T MODELS)
1. Turn ignition switch OFF.
2. Disconnect stop lamp switch harness connector.
3. Check harness continuity between stop lamp switch terminals 1 and 2 under the given conditions.
If NG, adjust stop lamp switch installation, refer to "BRAKE PEDAL" , and perform step 3 again.