350Z V6-3.5L (VQ35) (2003)
1. Bounce front of vehicle up and down to stabilize the posture.
2. Push vehicle straight ahead about 5 meter (16 ft.).
3. Put a mark on base line of the tread (rear side) of both tires at the same height of hub center. These are measuring points.
4. Measure distance "A" (rear side).
5. Push vehicle slowly ahead to rotate wheels 180 degrees (1/2 turn).
If wheels have rotated more than 180 degrees (1/2 turn), try the above procedure again from the beginning. Never push vehicle backward.
6. Measure distance "B" (front side).