350Z V6-3.5L (VQ35) (2003)
Right front tire with remaining tread depth = 5/32
Part numbers entered would be ==> TRDEPTH04A and TREDEPTH05C. Claim will be prorated based on the tire with the greater remaining tread
depth, 5/32.
^
Use "Part QTY" of "1" with "FW" as the detail coverage code, and a requested part amount of $00.01 for each part number. (Dealer will not receive
reimbursement of the $.01 part amount. This is only for internal use.)
NOTES (For Tire Replacement Pro-Rate Schedule):
A.
FRT for mount & balance is included in OP-CODES PW10AA & PW101A.
B.
This is the percentage of the cost of the new set of tires paid by the customer, including any special shipping, exclusive of any mount & balance
charges (see NOTE A, above). For example, if the tires on the vehicle are determined to have between 3/32" to 4/32" Tread Depth, and the total
cost for the two tires is $400.00, then the customer would pay $120.00 based on a 30% proration.
C.
Tire reimbursement costs MUST be supported by invoices retained in the vehicle file at the dealership.
ADDITIONAL ALIGNMENT NOTES:
Alignment Machine Printout
^
A copy of the Alignment Machine Printout showing BEFORE and AFTER alignment readings MUST be attached to the Repair Order (for
alignment).
^
Failure to attach this information may result in debit of the Warranty Claim.
^
This information should be kept in the vehicle's service history file.
Alignment Performed by Sublet Facility
^
If your dealership cannot align the 350Z and the alignment is sent out to a sublet facility, the sublet facility must follow the procedures outlined in
this bulletin.
^
You must obtain a printed copy of the Alignment Machine Printout from the sublet facility showing the BEFORE and AFTER alignment readings.
^
Check to make sure the sublet facility has accurately reset the Alignment.
^
The printout supplied by the sublet facility MUST be attached to the Repair Order.
^
Failure to attach this information may result in debit of the Claim.
^
This information should be kept in the vehicle's service history file.
Alignment Machine Calibration Certification