350Z V6-3.5L (VQ35) (2003)
2. Cut / split the side of a piece of rubber tube (vacuum line) and place it on the edge of the fuel pump opening.
^ This will protect your hands and arms from the sharp edge of the fuel tank.
Before continuing with this procedure:
^ Make sure the fuel tank is empty.
^ Read through all of the steps and understand the procedure.
3. Hold the Cut Bracket (cover) so the open side of the cover is towards the passenger side of the vehicle.
NOTE:
There is very little room inside the tank to maneuver the cover. You should hold it in the "installation direction" as you put it into the tank.