nissan Workshop Repair Guides

Nissan and Datsun Workshop Service and Repair Manuals

How to Handle Battery|Page 10536 > < How to Handle Battery|Page 10534
Page 3
background image

Hydrometer Temperature Correction Part 1

Hydrometer Temperature Correction Part 2

2. Use the chart to correct your hydrometer reading according to electrolyte temperature.

Charging the Battery

CAUTION:

-

Do not "quick charge" a fully discharged battery.

-

Keep the battery away from open flame while it is being charged.

-

When connecting the charger, connect the leads first, then turn on the charger. Do not turn on the charger first, as this may cause a spark.

-

If battery electrolyte temperature rises above 55 °C (131 °F), stop charging. Always charge battery at a temperature below 55 °C (131 °F)

Charging Rates

Do not charge at more than 50 ampere rate. 

NOTE:  The ammeter reading on your battery charger will automatically decrease as the battery charges. This indicates that the voltage of the battery is
increasing normally as the state of charge improves. The charging amps indicated above refer to initial charge rate.

How to Handle Battery|Page 10536 > < How to Handle Battery|Page 10534