nissan Workshop Repair Guides

Nissan and Datsun Workshop Service and Repair Manuals

Campaign - Front Wheel Alignment Warranty Extension|Page 11241 > < Campaign - Front Wheel Alignment Warranty Extension|Page 11239
Page 6
background image

APPLIED VEHICLE: 
2003 350Z (Z33)

APPLIED VINS: 
Vehicles built before: 
JN1AZ34E83T020553
JN1AZ34D83T118683

APPLIED DATE: 
Vehicles built before: May 27, 2003

IF YOU CONFIRM:

An applied vehicle shows the following symptoms when braking moderately:
^

excessive tire "roar" or "growl" noise,

^

mostly when braking at speeds below 30 mph.

ACTIONS:
^

Verify the incident noise as described above.

^

Check Alignment. Adjust (if needed).

^

Rotate Front Tires from Side to Side - Dismounting Tires from Wheels.

IMPORTANT:

The purpose of ACTIONS (above) is to give you a quick idea of the work you will be performing. You MUST closely follow the entire Service
Procedure as it contains information that is essential to successfully completing this repair.

CLAIMS INFORMATION

Submit a Primary Operation (P0) line claim using the claims coding shown.

SERVICE PROCEDURE

Verify Noise:

Verify the incident as described in the IF YOU CONFIRM section of this bulletin.

Check Alignment. Adjust (if needed):

1.

Check the vehicle's front end alignment and adjust Toe-in, if needed.

For details on Front End Alignment, refer to the FSU section/Wheel Alignment Inspection and Toe-in Inspection and/Service Data/Wheel
Alignment (Unladen) in the Electronic Service Manual (ESM).

The preferred setting is 2 mm (0.08 in.) [0.20] with no "variation" (zero [0] plus or minus). Once the final adjustment is done, it is very important
to not have any "toe-out".

IMPORTANT:

Campaign - Front Wheel Alignment Warranty Extension|Page 11241 > < Campaign - Front Wheel Alignment Warranty Extension|Page 11239