350Z V6-3.5L (VQ35) (2003)
Power Steering Pump: Service and Repair
Disassembly and Assembly
Disassembly and Assembly
PRE-DISASSEMBLY INSPECTION
Disassemble the power steering oil pump only if the following items are found.
^
Oil leak from any points shown in the figure
^
Deformed or damaged pulley
^
Poor performance
DISASSEMBLY
1. Secure power steering pump in a vise.
NOTE: Be sure to place aluminum plates or something similar between surface of the steering pump and the vise to prevent scratches or damage
to the pump surface.
2. Unscrew the two front bracket bolts and remove bracket from body assembly.
3. Unscrew the four cover assembly bolts and remove cover assembly from body assembly.
4. Remove O-ring A from body assembly.