350Z V6-3.5L (VQ35) (2003)
Clutch Master Cylinder: Service and Repair
Removal and Installation
CLUTCH MASTER CYLINDER
Removal and Installation
REMOVAL
1. Remove driver side kicking plate.
2. Remove footrest.
3. Remove dash side finisher (LH).
4. Remove instrument driver panel lower.
5. Remove VDC/TCS/ABS control unit.
6. Remove snap pin and clevis pin from the clevis, and separate it from clutch pedal.
7. Remove clips (5), and remove hood ledge cover (left).
8. Drain clutch fluid in the reservoir tank and remove hose from nipple.
CAUTION: Do not spill clutch fluid onto painted surfaces. If it spills, wipe up immediately and wash the affected area with water.