350Z V6-3.5L (VQ35) (2003)
2. If runout still exceeds specifications, disconnect propeller shaft at final drive companion flange; then rotate companion flange 90, 180, 270
degrees and reconnect propeller shaft.
3. Check runout again. If runout still exceeds specifications, replace propeller shaft assembly.
APPEARANCE CHECKING
^
Inspect propeller shaft tube surface for dents or cracks. If damaged, replace propeller shaft assembly.
^
If damage such as cracks or peeling off sealing Joint between yoke and tube) is found, replace propeller shaft with new one.
^
Check that the gap is between tube and yoke flange. If there is no gap, replace propeller shaft.
Diagnosis By Symptom
NOISE, VIBRATION, AND HARSHNESS (NVH) TROUBLESHOOTING
PROPELLER SHAFT / NOISE, VIBRATION, AND HARSHNESS (NVH) TROUBLESHOOTING
NVH Troubleshooting Chart
Use the chart to help you find the cause of the symptom. If necessary, repair or replace these parts.