350Z V6-3.5L (VQ35) (2003)
Disassembly and Assembly
DISASSEMBLY
Wheel Bearing
CAUTION: Do not disassemble if wheel bearing has no trouble.
1. Remove wheel bearing fixing bolts and anchor block fixing nuts inside axle vehicle, and remove wheel hub and bearing assembly, back plate and
anchor block from axle.
2. Using a drift (special service tool) and a puller (suitable tool), press wheel hub out to remove from wheel bearing.
3. Using a drift (special service tool) and a puller (suitable tool), press wheel bearing outer side inner race out to remove from wheel hub.
Bushing