350Z V6-3.5L (VQ35) (2003)
CYLINDER BLOCK (FOR CANADA)
DISASSEMBLY
Remove flywheel (M/T models) or drive plate (A/T models). Fix crankshaft with a ring gear stopper (special service tool), and remove mounting bolts.
Loosen mounting bolts in diagonal order.
TORX socket (size: T55, commercial service tool)
CAUTION: Do not disassemble drive plate.
Never place the drive plate with signal plate facing down.
When handling signal plate, take care not to damage or scratch it.
Handle signal plate in a manner that prevents it from becoming magnetized.
ASSEMBLY