350Z V6-3.5L (VQ35) (2003)
DO NOT remove the shift knob as shown in Figure 5.
8.
Clean the threads of the shift lever with a wire brush (see Figure 6).
9.
Apply a few drops of High Temp High Strength Threadlocker Red* (see Figure 6).
^
*Use Nissan P/N 999MP-AM004P, details covered in the PARTS INFORMATION section.
10.
Re-install the shift lever knob by HAND-TIGHTENING ONLY.
^
Turn the knob clockwise to tighten it.
^
Make sure the gear shift numbers and the knob are in the proper position (NOT slanted).