350Z V6-3.5L (VQ35DE) (2006)
Power Distribution Module: Reading and Clearing Diagnostic Trouble Codes
CONSULT-II Basic Operation
CONSULT-II BASIC OPERATION
CAUTION: If CONSULT-II is used with no connection of CONSULT-II CONVERTER, malfunctions might be detected in self-diagnosis depending
on control unit which carry out CAN communication.
1. With the ignition switch OFF, connect CONSULT-II and CONSULT-II CONVERTER to the data link connector, then turn the ignition switch
ON.
2. Touch "START (NISSAN BASED VHCL)".
3. Touch "IPDM E/R" on "SELECT SYSTEM" screen.
If "IPDM E/R" is not displayed, refer to GI-39, "CONSULT-II Data Link Connector (DLC) Circuit". See: Diagrams/Electrical
Diagrams/Powertrain Management/Computers and Control Systems/Data Link Connector/Schematic