350Z V6-3.5L (VQ35HR) (2007)
3. Securely fasten revolution sensor harness with clip.
4. Apply recommended sealant (Genuine Anaerobic Liquid Gasket or equivalent. Refer to "Recommended Chemical Products and Sealants".) to rear
extension assembly as shown in illustration. See: Testing and Inspection
CAUTION: Completely remove all moisture, oil and old sealant, etc. from transmission case and rear extension assembly mounting surfaces.
5. Install rear extension assembly to transmission case. (With needle bearing.)
CAUTION: Insert the tip of parking rod between parking pawl and parking actuator support when assembling rear extension assembly.
6. Tighten rear extension assembly mounting bolts to the specified torque. Refer to Exploded View AT-235.
CAUTION: Do not reuse self-sealing bolts.
7. Install rear engine mounting member.
8. Install oil pan to transmission case.
a. Install oil pan gasket to oil pan.