370Z V6-3.7L (VQ37VHR) (2010)
![background image](/nissan/370z/v6-3.7l_(vq37vhr)/Page-1657001.png)
Keyless Entry Receiver: Testing and Inspection
Front
Component Function Check
REMOTE KEYLESS ENTRY RECEIVER
FRONT : Component Function Check
1.CHECK FUNCTION
1. Select "INTELLIGENT KEY" of "BCM" using CONSULT-III.
2. Select "RKE OPE COUN1" in "DATA MONITOR" mode.
3. Check that the function operates normally according to the following conditions.
Is the inspection result normal?
YES - Remote keyless entry receiver is OK.
NO - See: Diagnosis Procedure.
Diagnosis Procedure
REMOTE KEYLESS ENTRY RECEIVER
FRONT : Diagnosis Procedure
1.CHECK REMOTE KEYLESS ENTRY RECEIVER OUTPUT SIGNAL
1. Turn ignition switch OFF.
2. Check signal between remote keyless entry receiver (front) harness connector and ground using oscilloscope.
Is the inspection result normal?
YES - GO TO 2.
NO - GO TO 3.
2.CHECK REMOTE KEYLESS ENTRY RECEIVER CIRCUIT 1
1. Disconnect BCM connector and remote keyless entry receiver (front) connector.
2. Check continuity between BCM harness connector and remote keyless entry receiver (front) harness connector.