370Z V6-3.7L (VQ37VHR) (2010)
Removal And Installation
SOFT TOP
SOFT TOP COVER OUTER : Removal and Installation
REMOVAL
1. Operate soft top as shown in the figure.
CAUTION:
Storage lid assembly may close due to low oil pressure.
Always support storage lid assembly in the fully open position using a supporting block.
2. Remove front rail weather-strip (LH/RH). See: Convertible Top Weatherstrip/Service and Repair/Exploded View.
3. Remove front rail weather-strip retainer (LH/RH). See: Convertible Top Weatherstrip/Service and Repair/Exploded View.
4. Remove rivets (A) retaining soft top cover outer front retainer.
5. Remove mounting screws (B). Remove soft top cover outer front retainer from soft top linkage assembly.
CAUTION:
Cover the surrounding area because iron powder is spread when using a drill.
NOTE:
Removal and Installation of Rivet