810 Maxima L6-2793cc 2.8L DSL SOHC (LD28) (1982)
A/C Relay: Testing and Inspection
Fig. 59 Testing A/C relay.
1.
Disconnect wiring harness connector to relay and check continuity with ohmmeterFig. 59.
2.
Meter should indicate continuity between terminals 2 and 3, but should indicate no continuity between terminals 1 and 4.
3.
Using jumper wires, connect battery voltage across terminals 2 and 3.
4.
Ohmmeter should indicate continuity between terminals 1 and 4.