Altima L4-2.5L (QR25DE) (2009)
CAUTION
^ If you are not familiar with the reprogramming procedure, refer to "CONSULT-III (C-III) TCM Reprogramming" general procedure.
^ Do not use the "Reprogramming / Programming" selection.
^ Select the Model and Model Year, and then navigate to Direct Diagnosis > Reprogramming.
2. When you get to the 1CM Reprogramming screen shown in Figure 1, confirm TCM reprogramming applies as follows:
A. On your C-III screen, look at the Part Number column (see Figure 1 example).
^
If this column is blank (no part number listed), this bulletin does not apply. Refer to ASIST for further diagnostic and repair information.
^
If a Part Number is listed, write it on the Repair Order and then go to Step B.