Altima L4-2.5L (QR25DE) Hybrid (2007)
Accelerator Pedal Position Sensor: Service and Repair
Accelerator Control System
ON-VEHICLE REPAIR
ACCELERATOR CONTROL SYSTEM
Exploded View ACC-3
Exploded View
Removal and Installation
REMOVAL
1. Disconnect the accelerator position sensor electrical connector.
2. Remove the accelerator pedal nuts.
3. Remove the accelerator pedal assembly.
-
For electrical inspection of the accelerator pedal position sensor. Refer to HBC-485, "Description". See: Testing and Inspection/Diagnostic
Trouble Code Tests and Associated Procedures/P Code Charts/P2126
CAUTION:
-
Do not disassemble the pedal assembly.
-
Avoid impact from dropping during handling.
-
Keep the pedal assembly away from water.
INSTALLATION
Installation is in the reverse order of removal.
-
Check the accelerator pedal for smooth operation. There should be no binding or sticking when applying or releasing the accelerator pedal.