Altima V6-3.5L (VQ35) (2003)
5.
Install the temperature control lever to the A/C control. Be sure to match the "key" positions (see Figure 5).
6.
Confirm installation by turning the temperature control knob. The knob should be easy to turn.
7.
Install the A/C control per the ESM, section MTC.
Temperature Control Cable and A/C Control Replacement
1.
Attach the new temperature control cable and new A/C control.
NOTE:
The cable may only be installed to the A/C control ONE (1) time. Removing the cable from the NC control will damage the cable and the A/C
control feature.
2.
Install the A/C control per the ESM, section MTC.
Disclaimer