Altima V6-3.5L (VQ35) (2003)
![background image](/nissan/altima/v6-3.5l_(vq35)/Page-2204001.png)
Brake Light Switch: Testing and Inspection
STOP LAMP SWITCH
1. Turn ignition switch "OFF".
2. Disconnect stop lamp switch harness connector.
3. Check harness continuity between stop lamp switch terminals 1 and 2 under the following conditions.
If NG, adjust stop lamp switch installation, refer to "BRAKE PEDAL", and perform step 3 again.
STOP LAMP SWITCH
1. Disconnect stop lamp switch harness connector.
2. Check continuity between stop lamp switch terminals 1 and 2 under the given conditions.
3. If NG, replace stop lamp switch.