Altima V6-3.5L (VQ35) (2003)
![background image](/nissan/altima/v6-3.5l_(vq35)/Page-1141001.png)
Vacuum Cut Valve: Testing and Inspection
VACUUM CUT VALVE BYPASS VALVE
With CONSULT-II
1. Reconnect harness disconnected connectors.
2. Turn ignition switch ON.
3. Perform "VC/V BYPASS/V" in "ACTIVE TEST" mode.
4. Check air passage continuity and operation delay time under the given conditions.
Without CONSULT-II
Check air passage continuity and operation delay time under the given conditions.