Altima V6-3.5L (VQ35) (2003)
![background image](/nissan/altima/v6-3.5l_(vq35)/Page-1726002.png)
4. Remove the swaybar bracket rear bolts and loosen the front bolts with power tool.
5. Remove the lower joint pinch bolt.
6. Disconnect the power steering high and low pressure lines from the steering gear.
7. Reposition the swaybar up and out of the way.
8. Remove the two steering gear mounting bolts.
^
Do not remove the steering gear mounting bracket from the gear housing.
9. Remove the power steering gear and linkage assembly.
10. Installation is in the reverse order of removal.
^
Install pipe connector.
^
Use the specified tightening torque when installing the high pressure and low-pressure pipe connections. Excessive tightening will damage
threads of connection or O-ring.
^
The O-ring in low-pressure pipe connector is larger than that in high-pressure connector. Take care to install the proper O-ring.