nissan Workshop Repair Guides

Nissan and Datsun Workshop Service and Repair Manuals

Transmission Control Systems > < Spark Plug|Specifications|Page 5697
Page 2
background image

^

Do not use a wire brush for cleaning the spark plug tip. 

^

If the spark plug tip is covered with carbon, a spark plug cleaner may be used.
Cleaner air pressure: Less than 588 kPa (6 kg/cm2, 85 psi) 
Cleaning time: Less than 20 seconds 

^

Checking and adjusting the spark plug gap is not required between change intervals. If the gap is out of specification, replace the spark plug.
Gap (nominal): 1.1 mm (0.043 inch) 

INSTALLATION 
Installation is in the reverse order of removal.
^

Use the standard type spark plugs for normal driving conditions.

^

The hot type spark plug is suitable when fouling occurs with the standard type spark plug under conditions such as:
^

frequent engine starts

^

low ambient temperatures

^

The cold type spark plug is suitable when spark knock occurs with the standard type spark plug under conditions such as:
^

extended highway driving

^

frequent high engine revolution

Transmission Control Systems > < Spark Plug|Specifications|Page 5697