Altima 2.5 SL L4-2.5L (QR25DE) (2002)
![background image](/nissan/altima_2.5_sl/l4-2.5l_(qr25de)/Page-2420026.png)
1.
Inspect the rear suspension member at the locations shown in Figure C3 for corrosion damage.
a.
If there is no corrosion damage, continue with step 2 of this procedure.
b.
If there is corrosion damage, go to Procedure B: Replace Rear Suspension Member.
2.
Secure the rear suspension member to the transmission jack with a suitable device, such as a tie-down strap. (See Figure C4).