Altima 2.5 SL L4-2.5L (QR25DE) (2002)
18.
The "REPROGRAM START" window should appear (see Figure C10).
NOTE:
If you get an "error" message, refer to the ECU Reprogramming Software Operations Manual in ASIST for instructions.
19.
Press "START". After a moment the window shown in Figure C11 will come up. CONSULT-II will now turn OFF its screen "backlight" and
begin to reprogram the ECM.
NOTE:
This process will take about 20 minutes.
CAUTION:
Leave the vehicle and the CONSULT-II unit "undisturbed" (don't "touch" them) until Reprogramming is complete.
When the Reprogramming is complete, CONSULT-II will:
^
"Beep"
^
Turn the screen backlight ON
^
Automatically print out a report
CAUTION:
^
If CONSULT-II prints out an ERROR message during the reprogramming process, the ECM has been permanently damaged and you'll have to
replace it.
^
If this happens, it is possible that a step(s) in the reprogramming procedure was missed/performed incorrectly, the vehicle's voltage supply (to