Altima 2.5 SL L4-2.5L (QR25DE) (2002)
1.
Obtain the Thread Repair Kit J-46530 and make sure all components are in the kit (see Figure C1).
NOTE:
Thread Repair Kit and additional threaded inserts ("Keen-Sert") can be ordered from TECH-MATE. The "Keen-Sert" part number is
J-46530-5.
2.
Install (push down until fully seated) and tighten the Drill Guide (identified by "DRILL ONLY") onto the "boss" of the broken screw (see Figure
G2).
^
Make sure the Drill Guide is securely tightened.