Altima 2.5 SL L4-2.5L (QR25DE) (2002)
will still need to perform all other parts of this bulletin on 2003 and 2004 Applied Vehicles.
Procedure C should be performed by an OBDII Certified technician.
Important Information About ECM Reprogramming and The Special "QR25 Campaign ECM Software" Reprogramming Card:
^
This is a special ECM Reprogramming procedure just for this Campaign.
^ Your dealership has been supplied with a special "QR25 Campaign ECM Software" reprogramming card for this campaign.
^ This card already contains all the ECM data needed for this campaign.
^
ECM data files do NOT have to be down-loaded from ASIST.
^ If the special 'QR25 Campaign ECM Software" reprogramming card is inoperable, refer to the Inoperable "QR25 Campaign ECM Software"
Reprogramming Card Procedure.
1.
With the Diagnostics (red/white) card still in slot A of CONSULT-II.
2.
Connect CONSULT-II to the vehicle making sure the connector is fully plugged in.
3.
Turn the ignition switch "ON", but do not start the engine. CONSULT-II will turn on automatically
4.
Press "SUB MODE", then select "BATTERY CHARGE".
5.
Check the vehicle's battery voltage reading on the CONSULT-II screen (see Figure C2).
NOTE: