Altima 2.5 SL L4-2.5L (QR25DE) (2002)
Remove the Center Member, but leave the Rear Engine Mount on the engine (see Figure H4).
Axle Shafts Removal (Altima and Sentra)
^
Be careful NOT to damage the oil seals in the transaxle when removing both axle shafts. Support the axles properly and pull them straight out to help
prevent damage.
Front Lower Control Arms (Altima and Sentra)
^
After disconnecting the Front Lower Control Arms from the vehicle underbody, tie them back for clearance when you remove the engine.
Power Steering Hose Support Bracket Bolts (Altima ONLY)
^
Make sure to remove the Power Steering Hose Support Bracket Bolts before engine removal (see Figure H5).
Power Steering Pipe Clamps (Altima ONLY)