Altima 2.5 SL L4-2.5L (QR25DE) (2002)
1.
Install the Diagnostics Card (red/white) into slot A of CONSULT-II (see Figure A1).
2.
Confirm the CONSULT-II date and time are correctly set as follows:
A.
With the Diagnostics Card (red/white) in slot 1, turn ON CONSULT-II.
B.
Touch "SUB MODE" (see Figure A2).
C.
Touch "SET DATE".
^
If the date is not correct, touch the month, day or year as needed. Then adjust it by using arrow keys. Once done, press "SAVE", press
"BACK" and go to step D.
If the date is OK, press "BACK" and go to step D.
D.
Touch "SET TIME".
^
If the time is not correct, touch the hour, minute or AM/PM as needed. Then adjust it by using arrow keys. Once done, press "SAVE", press
"BACK" and go to step 3.
If time is OK, press "BACK" and go to step 3 (next page).